PFN-7244V-AT is 24-port 10/100/1000M
PoE+ with 4 Combo SFP Rack-mount Unmanaged PoE Switch, the switch supports IEEE
802.3at Power over Ethernet standard, maximum high power consumption per
system. The switch is standard 19” rack-mount design to fit into the rack
environment. With these features, the switch is a superb choice for medium or
large network environment to strengthen its network connection and efficiency.
IEEE 802.3at Power over
Ethernet Plus (PoE+) ports
PFN-7244V-AT features 24 IEEE 802.3at
Power over Ethernet Plus (PoE+) ports supplying up to 30 watts per port. This
product can convert standard 100~240V/AC power into low-voltage DC that runs
over existing LAN cable to power up IEEE 802.3at compliant network accessories.
It also features PoE awareness to verify whether the network device receive
power is IEEE 802.3at compliant, or only the data will be sent through LAN
cable. By adding PFN-7244V-AT to existing networking, installing networking
products such as Access Points and IP cameras can be easily managed and set up.
Wireless device deployments are easily located with available power outlets and
network administrators don’t need to use heavy AC power adapters anymore.
4 Combo SFP Open Slots
PFN-7244V-AT supports 4 Combo SFP
open slots to uplink to servers, storage, or other switching devices for long
loop reach applications. Which is fully compliant with IEEE 802.3z 1000BaseSX/
LX SFP modules.
High-Speed Networking and
Jumbo Frames Support
PFN-7244V-AT provides an
excellent solution for expanding your Gigabit network. By Gigabit speed, this
product provides high flexibility and high bandwidth connectivity to servers,
workstations and other attached devices. It enables you to save time
transferring large files. In addition, it also supports Jumbo Frames 9.6KB to
improve network utilization of large file transfers.
1000 Mbps speeds and a switching
capacity of up to 48 Gbps meet the performance needs for even the most
bandwidth-hungry applications. The PFN-7244V-AT are perfect for graphics,
multimedia, and other applications that have to move large files across the
Every port can automatically
sense if the connected network devices are running at 10Mbps, 100Mbps or
1000Mbps and Half/Full-Duplex mode, and adjust accordingly.
This switch receives and forwards
traffic seamlessly with its non-blocking wire-speed. Every port simultaneously
supports up to 2000Mbps of bandwidth in full-duplex mode. This feature provides
full wire speed to the connected devices and allows you to run a smooth network.