OK
title-leftسوئيچ PFN-588IL title-right
bg-corner

Introduction

PS-588IL is 8-port 10M/100M Desktop Web Smart PoE Switch, the switch supports IEEE 802.3at Power over Ethernet standard, up to 30W per port and maximum 130W power consumption per system. With the PoE technology, there is no special network cable required for your PD devices. The switch also provides exceptionally smart Web management features, such as VLAN, QoS, RSTP, LACP, Port Security…etc. The switch is designed for small or medium network environment to strengthen its network connection. This product is compact 11” size, making it ideal for Desktop users with limited space. It also gives you the option of installing it in a 19” cabinet by rack-mount kits or underneath a desk

IEEE 802.3af Power over Ethernet (PoE) ports

PS-588IL features 8 IEEE 802.3at Power over Ethernet (PoE) ports supplying up to 30 watts per port. This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at compliant, or only the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

 

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable without a new electrical outlet for both power and data. It helps you reduce installation time and cost.

 

Exceptionally Smart

PS-588IL 8-port 10M/100M Desktop Web Smart PoE Switch features features management interface that can be managed through Web Browser and provides Smart features that are ideal for simple network applications and basic monitoring tools to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data, RSTP/Loop Protection to avoid network loop, link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and Port Security to secure your network. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely.

 

Auto-MDI/MDI-X

Every port can automatically sense your type of cable, so there is no need for crossover cables whether you are connecting this switch to another switch or to a computer.

 

Auto-Negotiation

Every port can automatically sense if the connected network devices are running at 10Mbps or 100Mbps and Half/Full-Duplex mode, and adjust accordingly.

 

Non-Blocking

This switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 200Mbps of bandwidth in full-duplex mode. This feature provides full wire speed to the connected devices and allows you to run a smooth network.




Technical Specifications

Standards

IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.3x Flow Control

IEEE 802.3ad Link Aggregation Control Protocol

IEEE 802.1Q VLAN

IEEE 802.1p Class of Service

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.3at Power Over Ethernet (PoE+)

Features

Number of Ports: 8

Fast Ethernet: 8-port 10/100 Base-TX, IEEE 802.3at PSE

MAC Address: 4K

Buffer Memory: 1.625M bits

Transmission Method: Store and Forward

Smart Features

Port Based VLAN: 8

Tagged Based VLAN: 16

STP/RSTP

IGMP Snooping V1&V2

Link Aggregation

Quality of Service(QoS): 4 priority queues, 802.1p

Security: Port & MAC binding

Port: Port State, Speed/Duplex, Flow Control Configuration

Port Mirroring

Bandwidth Control

Broadcast Storm Control

PoE Control: PoE Port Enable/Disable, PoE Status

Management: Web Management, password protection

Configuration backup/restore, Firmware upgrade

Filtering/Forwarding Rates

100Mbps port - 148,800pps

10Mbps port - 14,880pps

Transmission Media

10BaseT Cat. 3, 4, 5 UTP/STP

100BaseTX Cat. 5 UTP/STP

Led Indicators

Per Port: Link/Act, PoE Act/Status

Per Unit: Power

Power Input

100~240V/AC, 50~60Hz

Power Output

IEEE 802.3at Compliant Voltage, up to 30W Max. Per Port

Power Consumption

130 Watts (Max)

Operating Temperature

0 to 45

Storage Temperature

-20 to 90

Humidity

10 to 90% RH (non-condensing)

Dimensions

44 × 266 × 160 mm (Hx W x D)

Weight

1.8 kg

Certifications

FCC Class B, CE



DATA SHEET

bg-corner