PFN-5811ILPS is 8-port 10M/100M + 2 port Giga uplink (1*TP+1*SFP) Desktop
Web Smart PoE Switch, the switch supports IEEE 802.3at Power over Ethernet
standard, maximum 130W power consumption per system and no special network
cable required for your PD devices. The switch also provides exceptionally smart
Web management features, such as VLAN, QoS, RSTP, LACP, Port Security…etc. The
switch is designed for small or medium network environment to strengthen its network
connection. This product is compact 11”
size, making it ideal for Desktop users with limited space. It also gives you
the option of installing it in a 19”
cabinet by rack-mount kits or underneath a desk.
IEEE 802.3at Power over Ethernet (PoE) ports
PFN-5811ILPS features 8 IEEE 802.3at Power over Ethernet
(PoE) ports supplying up to 30 watts per port. This product can convert
standard 100~240V/AC power into low-voltage DC that runs over existing LAN
cable to power up IEEE 802.3at compliant network accessories. It also features
PoE awareness to verify whether the network device receive power is IEEE
802.3at compliant, or only the data will be sent through LAN cable. By adding PFN-5811ILPS
to existing networking, installing networking products such as Access Points
and IP cameras can be easily managed and set up. Wireless device deployments
are easily located with available power outlets and network administrators
don’t need to use heavy AC power adapters anymore.
No Special Networking Cable Required
By adding PoE devices, you can use an existing standard
Cat-5 Ethernet cable without a new electrical outlet for both power and data.
It helps you reduce installation time and cost.
PFN-5811ILPS 8-port PoE + 2 port Giga uplink (1*TP+1*SFP)
Desktop Web Smart PoE Switch features management interface that can be managed
through Web Browser and provides Smart features that are ideal for simple network
applications and basic monitoring tools to improve network efficiency. Through
a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS
to prioritize mission-critical data, RSTP/Loop Protection to avoid network
loop, link aggregation to create fat traffic pipelines, bandwidth control to
limit traffic load and Port Security to secure your network. All of these
features offer extra protection on the network edge. Best of all, the
password-protected configuration interface can be accessed remotely.
Every port can automatically sense your type of cable, so
there is no need for crossover cables whether you are connecting this switch to
another switch or to a computer.
Every port can automatically sense if the connected network
devices are running at 10Mbps, 100Mbps or 1000Mbps and Half/Full-Duplex mode,
and adjust accordingly.
This switch receives and forwards traffic seamlessly with
its non-blocking wire-speed. Every 100Mbps port simultaneously supports up to
200Mbps of bandwidth in full-duplex mode, Gigabit port supports up to 2000Mbps
of bandwidth in full-duplex mode. This feature provides full wire speed to the
connected devices and allows you to run a smooth network.