OK
title-leftسوئيچ PFN-201G title-right
bg-corner

Introduction

PFN-201G is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to strengthen its network connection. This product can convert standard power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE802.3at compliant, or only the data will be sent through LAN cable. By adding PFN-201G to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

 

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is difficult to obtain. It helps you reduce installation time and cost.

 

High Power PSE Power Injector

PFN-201G is a high power, PSE Power Injector for use in Power over Ethernet systems. The internal current limit and short-circuit protection are designed to provide up to 25W of PSE output power for power hungry PoE applications such as WAPs, security cameras and RFID readers.

 

Technical Specifications

Standards

IEEE 802.3af

IEEE 802.3at

IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.3ab 1000BaseT

Features

Number of Ports:

1 x Input (data only) Port

1 x Output (data + power) Port

Led Indicators

Per Port: PoE Act/Status

Per Unit: Power

Power Input

48V/DC

Power Output

48V/DC at Full 25~30 W Output Supported

Power Consumption

35 Watts (Max)

Dimensions

23 × 75 × 102 mm (H x W x D)

Weight

0.28 kg

Operating Temperature

0 to 40

Storage Temperature

-20 to 90

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class B, CE


DATA SHEET

bg-corner