OK
title-leftسوئيچ PFN-101 title-right
bg-corner

Introduction

PFN-101 is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to strengthen its network connection. This product can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding PFN-101 to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

 

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is difficult to obtain. It helps you reduce installation time and cost.

 

Technical Specifications

Standards

IEEE-802.3af

Features

Number of Ports:

1 Ethernet Input (data only) Port

1 Ethernet Output (data + power) Port

Led Indicators

Per Unit: Power

Power Input

90~260V/AC, 50~60Hz

Power Output

48V/DC at Full 15.4 W Output Supported

Power Consumption

19 Watts (Max)

Dimensions

120 × 50 × 35 mm (L x W x H)

Weight

0.14 kg

Operating Temperature

0 to 40

Storage Temperature

-20 to 85

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class A, CE



DATA SHEET

bg-corner